EasyManua.ls Logo

WireLogic Smart Surge 6 - Step 4: Power Connection; Energy Saver On Mode Operation; Energy Saver Off Mode Operation

WireLogic Smart Surge 6
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The following electronic devices should be plugged into the ALWAYS ON
outlets:
IN HOME OFFICE
Modem
Wireless router
Fax machine
External hard drive
IN HOME ENTERTAINMENT
Cable/set-top box
DVR/TiVo
VCR
STEP 4
Plug the Smart Surge 6’s power cord into the wall receptacle.
OPERATION
ENERGY SAVER ON MODE
In this mode, the ENERGY SAVER outlets will be turned on only when
the MASTER CONTROL outlet device is turned on. When the MASTER
CONTROL outlet device goes into standby or sleep mode, or is turned
off, the devices connected to the ENERGY SAVER outlets automatically
shut off.
ENERGY SAVER OFF MODE
In this mode, devices on the ENERGY SAVER outlets can be used
independent of the MASTER CONTROL outlet device. This function will
maintain continuous power to the ENERGY SAVER outlets.