9.7.2 Add multiple IPTV outputs
In the Output, select IPTV in the drop down list for Output type and Multiple as Create mode
1. Enter a name for the output
2. Enter the Number of outputs
3. Select the Property to increment [Destination address, Port]
4. Select Protocol [UDP, RTP]
5. Select the Bitrate mode [CBR, VBR]
6. For CBR, set the output Bitrate (Mbit/s)
7. Set the TTL Time to live (hops). The default TTL=255 => no limit for the lifespan of data.
8. Select Network interface in the drop-down list.
9. Set the Start Destination address.
10. Set the Start Port
11. Click the “yellow tick” to save the settings
In the example below, 4 IP outputs were created with incremented Destination address:
The properties of the auto-created IP outputs, e.g. the names, can be edited by clicking the arrow in front of
the output name, enter the Settings and change the parameters.
To Next Page
Loading...
