To Next PageTo Next Page
Need help?Do you have a question about the Wisniowski UNITHERM SSp and is the answer not in the manual?
General| Manufacturer | Wisniowski |
|---|---|
| Model | UNITHERM SSp |
| Type | Sectional Garage Door |
| Panel Material | Steel |
| Maximum Door Height | 3000 mm |
| Control | Remote Control |
| Number of Remote Controls | 2 |
| Operating Temperature | -20°C to +60°C |
| Protection Class | IP44 |
| Power Supply | 230V / 50Hz |
Details about the door and installation by competent persons.
Explanation of terms like Professional Installer, Competent Person, and Owner.
Explanation of symbols used for optional elements and operation modes.
Ensure no persons or objects are in the path of moving garage door.
Do not use the garage door to lift objects or people.
Safety warnings for door operation, maintenance, and handling.
Guidelines for correct assembly and operation of the door.
Conditions for room, walls, lintel, and floor for proper installation.
Step-by-step instructions for assembling specific door models.
Procedure and safety rules for tightening torsion springs.
Detailed steps for tightening springs using steel rods and safety precautions.
Checks for CE plate, handover of instructions, and protective foil removal.
Guidelines for recycling packaging and scrapping materials.
Steps for safely disassembling the garage door.
Owner's guide for safe usage, operation, and maintenance.
Key information, safety regulations, and prohibitions for door operation.
Information regarding prohibited actions and misuse of the garage door.
Instructions for safe and correct operation of the garage door.
Procedures for locking and unlocking the door from inside and outside.
Specifications for water resistance, wind load, thermal resistance, and air permeability.
Tasks for owners and competent persons for periodic door maintenance.
Prohibited environments and uses for the garage door.
Information on the installation, application, and safety of the anti-drop device.
Instructions for assembling the anti-drop safety device during door installation.
Steps to take if the anti-drop safety device is activated.
Guidance on maintaining the anti-drop safety device and replacement policy.
Specific checks for the anti-drop safety device during maintenance.
Requirements for performing works and documenting them in the report book.
Common causes and solutions for door operation issues.
Troubleshooting steps for dropped door cables.
Solutions for unbalanced door leaf and difficult operation.
Checks for smooth roller rotation and lubrication.
Troubleshooting for mounting vibrations and fixing points.
Solutions for incorrect lock operation and bolt issues.
Action for activated anti-drop safety device: replace with new one.
Checks for cable winding, tension, and length.
Troubleshooting for rollers slipped out from the guide.
Action for activated spring break device: replace with new one.
Checks for cable winding and limit switches for even closing.
Check floor leveling and bottom sealing contact.
Check top roller holder mounting and door leaf position.
Check door leaf position behind the lintel and gaps between panels.
Lubricate springs if signs of corrosion or high noise are observed.
