29
No power
Cause Solution and
No function when
pressing the button
Press the RST button
Unable to receive
stations
Check and make sure whether the antenna
is inserted or the antenna is properly
connected. If so, insert the antenna or
connect it properly.
Poor effect on
receiving a station
Video output
without images
Noise appears,
image flash,
no color
NO function to
remote control
Simple Trouble Shooting
Simple Trouble shooting
PROBLEM
Check and make sure whether the fuse is
blown, replace with the proper value if
necessary.
Antenna may not be the proper length.
Make sure the antenna is fully extended or
broken. if broken, replace the antenna
with a new one.The broadcasting signal is
too weak.The antenna is poorly grounded;
make sure the antenna is properly
grounded at its mounting location.
Poor effect on
electronics anti-
shaking
The unit's deck is dusty. Please clear it.
The disc can not
be loaded
A disc is already loaded.
The video line from main unit to external
monitor is not connected properly.
The disc is dirty or damaged.Improper
setting of the color system. Set the color
system to “PAL" or "NTSC", according to
the connected television.
The remote control is in low power battery,
please replace the batteries.Remote
window can't receive signal source, Aim the
remote control to the window on the unit.
To Next Page
Loading...