Witter Towbar Systems ZEKAD001CN User Manual

AUDI
Technical Support No:
01244 284584
1/15
87010874 / 10.01.2013
© ConWys AG
DROME ROAD DEESIDE INDUSTRIAL PARK DEESIDE FLINTSHIRE CH5 2NY
Part No. ZEKAD001CN
A5 Coupe 06/07
A5 Cabriolet 05/09
A5 Sportback 09/09
Installation of the towing electrics kit must be undertaken
by a specialist workshop or an appropriately qualified
person. Before starting work, you must read the installation
instructions through completely. After installing the towing
electrics kit, the installation instructions should be kept
with the vehicle service documentation.
All claims under the guarantee will lapse in case of improper use or
modification of the towing electrics kit or any of its component parts.
When driving without a trailer or load carrier, any adapter installed
must be removed from the electrical socket. We reserve the right to
alter the design, content or colour. We accept no liability for any
errors in these instructions. All details and illustrations are non-
binding.
Fitting instructions
In case of missing a rear fog lamp on the trailer, it should be retrofitted.
We accept no responsibility and give no guarantee for technical and
electrical modifications made after the initial operation of the towing
electrics kit by the vehicle manufacturer and which may lead, for
example to malfunction of the trailer socket or its peripheries.
The trailer module is not diagnostics-capable. If the manufacturer’s
diagnostics processes or software-supported test mechanisms
generate error reports directly or indirectly linked with trailer operation,
the trailer module must be disconnected from the leads to the trailer
socket and a new diagnostic process initiated.
Electric wiring kit for towbars / 7-pin / 12N / 12 Volt / ISO 1724
IMPORTANT!

Witter Towbar Systems ZEKAD001CN Specifications

General

Brand	Witter Towbar Systems
Model	ZEKAD001CN
Category	Automobile Accessories
Language	English

Summary

Symbol Explanation

Option 1: Vehicles with Trailer Preparation

Option 2: Vehicles without Trailer Preparation

Wiring Harness and Connector Installation

32-Pin Black Connector Installation

Connecting the 32-pin black connector and associated wiring.

CAN-Data Wire Connection

Instructions for connecting CAN-Data wires for vehicle integration.

32-Pin Grey Connector Installation

Connecting the 32-pin grey connector and associated wiring.

16-Pin Brown Connector Installation

Connecting the 16-pin brown connector and associated wiring.

CAN-Data Wire (Cabrio) Connection

Specific CAN-Data wire connection for the Cabrio model.

Fusebox Installation and Configuration

Fusebox Wiring and Fuse Insertion

Detailed steps for wiring the fusebox and inserting fuses F3 and F4.

Optional Features

Supplementary Harness Installation

Details on the optional supplementary harness for the 12S socket.

Trailer Simulator Setup

Instructions for setting up and using the trailer simulator.

Trailer Operation Setup and Coding

Coding Procedure

Guided steps for coding the vehicle's systems for trailer use.

Diagnosis and Troubleshooting

Control LED Diagnosis Functions

Explanation of control LED functions and diagnosis modes.

Lamp Substitution Feature

Details on how trailer indicator failures are compensated.