Wolf CE152TF/S - Page 62

Page 62
Integrated Modules
Integrated Modules
Component Removal
3-30
#826498 - Revision B - December, 2016
Generator
To remove the generator, first remove the generator
plate, then (See Figure 3-61):
1. Use a T-20 Torx bit to extract the screws from the
generator plate.
2. Remove the generator from the generator plate.
Generator Pan
To remove the generator pan, first remove the genera-
tor plate, then (See Figure 3-62):
Use a T-20 Torx bit to extract the screws from both1.
sides, front and back.
Lift the generator pan from the burner box.2.
Figure 3-61. Generator
Figure 3-62. Generator Pan