wolfappliance.com
|
11
Coffee
PRE-GROUND COFFEE
1 Press multiple times and select pre-ground.
2 Using the handle, slide unit forward and open the pre-
ground coffee lid. Refer to the illustration below.
3 Use the scoop provided to place one scoop of pre-
ground coffee into the funnel, then slide unit back into
position. NOTE: Using more than one scoop will cause
unit to clog.
4 Press multiple times to select the desired volume.
5 Press to initiate the cycle. Press to initiate the
cycle and double the volume.
6 Adjust the height of the coffee spout as close to the cup
as possible.
PRE-GROUND COMPARTMENT
Pre-ground compartment.
COFFEE SYSTEM OPERATION
To Next Page
Loading...
