Need help?Do you have a question about the Wolf KG 40 and is the answer not in the manual?
General| Brand | Wolf |
|---|---|
| Model | KG 40 |
| Category | Air Conditioner |
| Language | English |
Explains warning symbols (! and Caution) and emphasizes compliance with all warnings on the unit.
Covers qualified personnel, electrical safety, operating within nominal range, and permitted air quality.
Fan shaft horizontal, remove transport locks, adjust Vee-belt pulleys for fan speed.
Wiring by qualified electrician; comply with regulations; conduct safety inspection.
Use thermistor triggers or interlock contactors; install lockable repair switches.
Wiring diagrams for KG 15/KG 20 units, including 5-stage control specifications.
Pre-start checks, Vee-belt pulley adjustment, fan rotation, and airflow verification.
Check piping for leaks, bleed system; ensure fan runs before activating heating.
Ensure minimum air flow rates are met to prevent overheating; auto shutdown if airflow fails.
Check piping, bleed system, ensure condensate drainage; verify antifreeze concentration.
Prevent moisture in piping; check air-discharge temperature; avoid refrigerant release to atmosphere.
Lubricate bearings; tension Vee-belts after 50 hours and periodically.
Clean heat exchangers; maintain condensate drains and siphons.
Details for heaters, chillers, steam registers, washer, and siphons.
To Next Page
