Need help?Do you have a question about the Wolfgang Warmbier METRISO 3000 and is the answer not in the manual?
General| Brand | Wolfgang Warmbier |
|---|---|
| Model | METRISO 3000 |
| Category | Test Equipment |
| Language | English |
Describes the function of keys like ESC, MEM, HELP, START, CONTIN.
Explains softkey functions like parameter selection, limit value specification, entry, and memory.
Details batteries, fuses, charger socket, RS 232, and USB ports.
Explains battery level, measuring status, and memory occupancy displays.
Lists functions like RESD, R, U, Uesd, and tests like Battery test, SW-INFO.
Details measurements, display functions, and special features like data storage and USB interface.
Explains battery replacement, type, and charging procedures using the Z502R charger.
Details how to perform LED and LCD self-tests.
Covers adjustments for display brightness and contrast.
Explains setting time, language, auto-shutdown times, and restoring defaults.
Explains lead connection, optical indicators (LEDs) for limit values and interference voltage.
Details instrument power management, measurement value display, and memory.
Explains the procedure for safely discharging capacitive objects.
Covers DUT parameter, measuring point, and limit value settings for documentation.
Details how to measure resistance to ground (Rg) and groundable points (Rgp).
Explains measuring person-to-ground resistance (Rg System/Rgp System).
Explains measuring resistance between two points on a surface.
Details measuring surface resistance of packaging materials using a ring probe.
Explains using the GUARD terminal to prevent surface current distortion in high resistance measurements.
Explains creating structures for customer, building, and ESD control elements in the instrument.
Details transferring structures between the PC and the test instrument via USB.
Provides a step-by-step example for creating structural elements like floor covering.
Explains how to enter names for buildings and ESD control elements.
Details how to search for existing structural elements by ID or text.
Explains the process of saving measurements to structural elements and adding comments.
Details how to display saved measurement data and their pass/fail status.
Explains how to use scanners for searching and editing structural elements.
Details RESD, R, and U measuring ranges, intrinsic error, and uncertainty.
Covers protection class, measuring category, EMC compliance, and fuse information.
Information on batteries, charger, and LED indicator functions.
Details display values for uncertainty and the meaning of IP protection codes.
Illustrates characteristic curves for voltage at device under test vs. resistance.
Explains battery care, charging, and potential issues.
Details checking and replacing the instrument's fuse and the electronic fuse protection.
Information on proper disposal of the instrument and batteries according to regulations.
Explains errors related to interference voltage, offset, and blown fuses.
Covers battery voltage errors, invalid parameter combinations, and scanner issues.
Explains errors related to saving data, full memory, and deletion prompts.
Lists optional items like the Master Battery Pack and Charger.
To Next Page
