To Next PageTo Next Page
Need help?Do you have a question about the Wonderfire AF 16 NV and is the answer not in the manual?
General| Brand | Wonderfire |
|---|---|
| Model | AF 16 NV |
| Category | Indoor Fireplace |
| Language | English |
Guide to safe manual handling of the appliance.
Details on the approximate lifting weight of the appliance.
Available conversion kits for natural gas to propane.
Measured efficiency percentages and net to gross conversion factors.
Precautions for handling materials containing Refractory Ceramic Fibres (RCF).
Table of gross heat input and injector sizes for different models.
Legal requirements and relevant British Standards for installation.
Dimensions for burner tray compatibility with convection boxes.
Requirements for flues, fireplaces, and clearances.
Minimum flue height and handling of chimney dampers.
Diagram and dimensions for hearth sizes for different models.
Specific clearance requirements for hole-in-the-wall installations.
Requirements for tactile separators and fire barriers.
Sealing requirements for underfloor draught type fireplaces.
Specifications for hearth and surround materials and their placement.
Minimum height requirements for combustible shelves above the fireplace opening.
Ventilation requirements for Great Britain and the Republic of Ireland.
Restrictions on installing the appliance in rooms with baths, showers, or steam.
Precautions regarding soft wall coverings near the appliance.
Requirement for fitting a fireguard for safety.
Explanation of the Atmosphere Sensing Device (A.S.D.) function and precautions.
List of components included with the appliance for unpacking.
General information about standard and large convection boxes for fireplaces.
Additional flue requirements for NV models when using convection boxes.
Diagram and dimensions for standard and large convection boxes.
Required dimensions for fireplace openings and hearths for convection boxes.
General requirements for fireplace size and clearance.
Requirements for the general condition and flatness of the fireplace.
Ensuring the fireplace back is sound for appliance attachment.
Procedure for checking the fireplace flue pull.
Details on connecting the gas supply to the appliance.
Steps for preparing the convection box and components for installation.
Instructions for fitting the self-adhesive foam sealing material.
Step-by-step guide for installing the convection box into the fireplace.
Details on cable retention for securing the convection box.
Procedure for securing and aligning the convection box using tension cables.
Instructions for sealing the floor around the convection box.
Instructions for sealing the floor front of the convection box.
Guide to installing the burner assembly and connecting the supply pipe.
Information regarding the separate guide for fitting ceramic fuel effect.
Advice on initial operation, potential odours, and burner surface cracking.
Procedure for lighting and operating the manual control burner.
Instructions for operating the fire using the remote control handset.
Checking ignition and adjusting flame height for remote control operation.
Instructions for adjusting the remote control handset and receiver codes.
Procedure for operating the top control burner manually.
Checking heat settings and shutting down the TC burner.
Using the top control for heat settings and switching to pilot.
Procedure for checking the inlet gas pressure.
How to set the aeration control on applicable models.
Procedure for performing a spillage check before leaving the appliance.
Interpreting spillage test results and required actions.
Checking the operation of the flame supervision and spillage monitoring system.
Requirements for using decorative firefronts, including minimum open area.
Final checks, customer advice, and handover procedures.
Safety precautions for handling RCF during servicing and maintenance.
Steps for performing annual maintenance on the appliance.
Step-by-step guide to removing the injector.
Step-by-step guide to removing the thermocouple and pilot unit.
Step-by-step guide to removing the gas valve unit.
Procedure for removing the convection box from the fireplace.
Immediate actions to take if you smell gas.
Safety requirements for installation, including competent person and chimney sweeping.
Minimum clearance requirements for shelves above the appliance.
Safety advice on fireguards and wall coverings near the fire.
Table showing heat input (kW Gross) for different models.
Advice on initial operation, potential odours, and burner surface cracking.
Explanation of the Oxysafe safety system for flame sensing and flue blockage.
Procedure for lighting and operating the manual control burner.
Instructions for operating the fire using the remote control handset.
How to adjust the flame height using the remote control.
How to set RC burner to pilot only and turn it off.
Procedure for operating the fire manually in case of battery failure or no handset.
Using the manual pilot valve operator for lighting.
How to operate the fire using the top control.
Steps for lighting the TC burner and controlling its heat settings.
Using the top control interface for TC burner operation.
Procedure for setting the aeration control on compatible models.
Instructions for cleaning metal parts and the fascia of the appliance.
Guidance on cleaning ceramic fuel effect pieces containing RCF.
Instructions for cleaning the ceramic burner.
Instructions for refitting the ceramic fuel effect pieces.
Procedure for replacing batteries in the remote control receiver.
Procedure for replacing batteries in the top control battery holder.
Procedure for replacing the battery in the remote control handset.
Essential regular maintenance and checks for safety and efficiency.
Information on how to obtain replacement ceramic fuel effect parts.
Details of the warranty period and service requirements.
How to register the fire and book service calls with Heateam.
Information required when contacting Heateam for service.
Details of what is covered under the manufacturer's warranty.
Details of what is excluded from the manufacturer's warranty.
Section for the installer to fill in their details.
List of models and product codes for identification.
Fields for recording serial number, fascia name, and code.
Fields for recording the brand and date of installation.
