WONDFO Finecare FIA Meter Plus FS-113 User Manual

Version: 30/06/2016
Finecare™ FIA Meter Plus
Operation Manual
Model No.: FS-113

WONDFO Finecare FIA Meter Plus FS-113 Specifications

General

Model	FS-113
Sample Type	Whole blood, serum, plasma
Result Time	Immediate after measurement
Display	LCD screen
Data Storage	Up to 10, 000 results
Storage Humidity	10% to 90% RH
Portability	Portable
Type	Fluorescence Immunoassay Analyzer
Technology	Fluorescent Immunoassay
Test Types	Various
Sample Volume	10-100 μL
Measurement Time	Approximately 15 minutes
Detection Range	Varies depending on the test
Connectivity	USB, Bluetooth
Printer	External printer
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	15-30°C
Operating Humidity	≤80%
Design	Compact, benchtop
Measurement Principle	Quantitative fluorescence immunoassay

Summary

Introduction

Test Principle

Explains the working principle of the Finecare™ FIA Meter Plus using LED excitation light.

Intended Use

Specifies the device is for in vitro diagnostic use and professional application in labs or point-of-care settings.

Contents

Unpacking

Instructions for unpacking the Finecare™ FIA Meter Plus and checking included items.

Specifications

Basic Specification

Details the core technical specifications of the Finecare™ FIA Meter Plus.

Operating Environment

Specifies the recommended temperature, humidity, and location for meter operation.

Storage and Transportation Environment

Outlines the conditions for storing and transporting the instrument safely.

Warning, Precautions and Limitations

General Warnings and Precautions

Lists essential safety guidelines, handling instructions, and operational limitations for the meter.

Installation

Power On

Step-by-step guide to powering on the Finecare™ FIA Meter Plus.

Install Paper

Instructions for loading the printer paper roll into the meter.

Main Interface

Description of the initial screen and how to interact with the meter.

Set Parameters

Guides on configuring LIS connection, temperature, and test item parameters.

Operation

Run a Test

Detailed steps for performing a test analysis using the meter.

History Data

Functionality for viewing, searching, deleting, printing, and exporting test history.

Communication Settings

Connect to LIS/PC

Instructions for connecting the meter to LIS or PC for data transfer.

Get a Count Function

Using the 'Account' function to count records based on filters.

Configure PC Network Settings

Steps to set up IP address and network configuration on the PC.

Upload History Data to PC

How to upload historical data from the meter to a PC.

Quality Control

Run Quality Control

Procedure for performing internal quality control checks on the meter.

Trouble Shooting

Meter Operational Issues

Addresses common problems like power failure and connection issues.

Test Result Display Issues

Solutions for scenarios where no results are displayed or results are abnormal.

Error Messages and System Faults

Guides on interpreting and resolving specific error messages and system faults.

Maintenance and Care

General Maintenance

Basic care instructions for the instrument, including cleaning and returns.

Cleaning Procedures

Specific instructions on how to clean the exterior of the meter safely.

Return and Disposal

Guidelines for returning a malfunctioning meter and proper disposal of the device.

Contact Information