Siren
The siren has waterproof case and is designed to
be mounted on an exterior wall of your property.
Mount the siren as high as possible so its siren and
strobe light will attract attention when an alarm is
activated.
Three wall plugs and screws are supplied to mount
it to the wall.
Remove the cover:
1. Use Philips screwdriver to loosen the
bottom screw (A) until the screw head is
clear of the cover.
2. Carefully pull the bottom of the cover until
it clears the screw, then remove the cover.
Mount the siren:
3. Hold the siren base against the wall where
you intend to mount it and mark the three
mounting holes (B). Drill the holes and
insert the wall plugs.
A
B
19
To Next Page
Loading...