Pair the primary light switch
The primary light switch will be the main hub of the Wondrwall network. Select the
light switch in the middle of your home, nearest to your wireless router.
1. Open the Wondrwall app and press Login with Amazon (A). Follow the on-screen
instructions to login to your Amazon account. On the Wondrwall welcome screen,
press Configure own house (B).
2. Press Start on the Initialisation screen (C) to open the Install wizard which gives
step-by-step instructions.
3. Remove the front cover of the light switch to locate the functional button (D). Press
Next on the app.
4. Use pin to press and hold the button for about 20 seconds until all three LEDs
flash. Release the functional button and press Next on the app (E).
5. Enter your network SSID and password in the Wi-Fi Setup screen (F) to join your
home wireless network. Press Access.
23
To Next Page
Loading...