Pair the primary light switch (continued)
6. Press Specify on the House Setup screen to specify your home location (G). This
feature allows Wondrwall to adjust the environment and energy consumption
settings depending on how far you are from home. (Press Skip to skip this step).
7. A map shows your current location (H). Press Specify House Location.
8. Name your house in the next screen and press Save (I).
9. Now, press the displayed location name (J) to show list of existing locations.
Press the one you require to select it. Alternatively, press Create new location to
specify new location. Press Next.
10. Type in name for the light switch and press Save.
11. Press Select socket state (K) and choose the option from the list (L) that best
describes how the light switch is wired. The selected socket state will display on
the screen. Press Next.
12. Finally press Finish on the Success screen to end the installation, or press Add
another device to continue pairing the rest of your Wondrwall devices.
25
To Next Page
Loading...