Pair the siren
We recommend that you pair the siren before you fix it to the wall.
1. Either click Add another device in the Success screen, or the + on the Devices
screen, then select Siren from the Device Selection list (A).
2. Remove the cover (page 19). Press Next on the app (B).
3. Press and hold the function button (C) for about 10 seconds until the right hand
LED flashes. Release the button. The siren is now connected to the Wondrwall
network. Press Next on the app (D).
4. Now, press the displayed location name (E) to show list of existing locations
(scroll down if necessary). Press the one you require to select it. Alternatively,
press Create new location to specify new location. Press Next.
5. Finally either press Finish on the Success screen (F) to end the installation or Add
another device to continue pairing the rest of your Wondrwall devices.
6. Replace the cover (page 20).
33
To Next Page
Loading...