Safety & General Information
Electrical Safety
Safety & General Information AS80doc121616 1-3
1
Possible combinations:
1.4 Electrical Safety
DANGER! Make sure all electrical installation, service
and/or maintenance work is performed by a qualified
electrician and is in accordance with applicable electrical
codes.
DANGER! HAZARDOUS VOLTAGE can cause shock,
burns, or death. SHUT OFF & LOCK OUT
POWER before performing service in any area of this
machine. DO NOT restore power until all access panels are
replaced and secured.
WARNING! Always turn off and disconnect power at control
console AND at main supply circuit breaker before
performing any service to the machine.
DANGER! It is recommended that a 30mA Ground Fault
Interrupter (GFI) be used.
1.5 Blade Handling
WARNING! Always wear gloves and eye protection when
handling bandsaw blades. Keep all persons away from
area when coiling or carrying a blade (4 meters at least).
1.6 Machine Operation
CAUTION! Read thoroughly the operator’s manual before
operating the sharpener.
Model Version Voltage
code
Standard
code
Description
BMS 200 M U Sharpener / economy /1x110V 60Hz/ UL
BMS 200 A Sharpener / economy /1x230V 50Hz/
BMS 200 A U Sharpener / economy /1x230V 60Hz/ UL
BMS 250 M U Sharpener / personal /1x110V 60Hz/ UL
BMS 250 A U Sharpener / personal /1x230V 60Hz/ UL
BMS 250 A S Sharpener / personal /1x230V 50Hz/ CE
To Next Page
Loading...
