Wood-mizer BMS200 - Control Panel Components

1-8 AS80doc121616 Safety & General Information
Safety & General Information
Control Panel Components
1
1.12 Control Panel Components
See Figure 1-5. The BMS250 control panel components and their descriptions are shown
below.
 Disconnect button
Turns on/off the sharpener power and the oil pump.
Press "0" on the disconnect switch to turn the sharpener power off (e.g. before
servicing or when the sharpener is not in use). NOTE: Press "0" on the disconnect
switch before opening the control box door. Disconnect and lock out power supply
before servicing!
To reconnect power to equipment, press "1" on the disconnect swirch.
FIG. 1-6
I
0
I
0
S10364-P3
CBNSH35D
Feed Rate Dial
Emergency
Stop
Disconnect
Switch
Cam Motor
Start/Stop Switch
Grinder Motor
Start/Stop Switch
Coolant Pump
Start/Stop Switch