Maintenance
Grinding Wheel Replacement
Maintenance AS80doc121616 3-1
3
SECTION 3 MAINTENANCE
3.1 Grinding Wheel Replacement
Check the grinding wheel often and change as necessary. Wheels approved for use with
the sharpener are available from Wood-Mizer.
The grinding wheel should be in good condition. Replace if worn, the edges look shiny,
and/or the wheel is "burning" the blades. NOTE: The grinding wheels have a CBN (Cubic
Boran Nitride) coating.
1. To replace, shut down and lock out all power to the machine.
2. Remove the grinding wheel cover.
3. Remove the grinding wheel nut, washer plate and grinding wheel.
4. Install the new grinding wheel. Reinstall the washer plate and nut.
5. Reinstall the grinding wheel cover.
3.2 Oil Level
Periodically check the oil level and refill with oil as necessary. The oil level should be kept
between 4.5 and 5 litres. Use only Wood-Mizer approved grinding oil.
Filter the oil to remove metal shavings before reusing.
To Next Page
Loading...
