Wood-mizer BMS500 - 3 Blade Supports Kit (Option)

REPLACEMENT PARTS
3" Blade Supports Kit (Option)
REPLACEMENT PARTS doc121319 8-29
8
8.22 3" Blade Supports Kit (Option)
REF. DESCRIPTION ( Indicates Parts Available In Assemblies Only) PART # QTY
SUPPORT KIT, BMS500/600 3" BLADE 505584 1
GUIDE, 3" BLADE COMPLETE 503790 1
1 PLATE, 3" BLADE GUIDE ZINC-PL. 503791-1 1
2 BEARING, 6203 2RS CX 086114 8
3 WASHER, 17 FLAT ZINC F81058-1 6
4 WASHER, 13 FLAT ZINC F81056-1 2
5 NUT, M12-8 HEX NYLON ZINC LOCK F81034-2 2
6 WASHER, 8.5 SPECIAL FLAT ZINC F81054-11 2
7 WASHER, 8.2 SPLIT LOCK ZINC F81054-4 2
8 BOLT, M8x25-8.8-B HEX HEAD FULL THREAD ZINC F81002-5 2
SUPPORT, 3" BLADE COMLETE - ENTRY SIDE 504402 1
STAND, 690-1100 KP BLADE SUPPORT ADJUSTABLE 504401 1
9 TUBE WLDMT, STAND BASE PTD 504392-1 1
10 TUBE WLDMT, STAND ADJUSTMENT ZINC-PL. 504398-1 1
11 CHANNEL, INNER CLAMPING ZINC-PL. 504394-1 1
12 CHANNEL, STAND OUTER ZINC-PL. 504400-1 1
13 WASHER, 13 SPECIAL FLAT ZINC F81056-14 1
14 KNOB, 1580 DIA. 63x25 M12 500460 1
COVER, ENTRY-SIDE BLADE SUPPORT COMPLETE 505568 1
is203_038