Wood-mizer BMS500 - Technical Data

Safety & General Information
Technical Data
Safety & General Information BMS500/600doc121319 1-6
1
1.8 Technical Data
See Table 1-5. See the table below for technical data on the BMS500/BMS600 sharpener.
See Table 1-6. See the table below for coolant specifications.
Maximum Blade Width 76 mm (3")
Grinding Wheel Main Shaft Speed 4280 rpm
Feed Rate 0-64 teeth / min
Coolant Tank Capacity 15 l (3 gallon)
Cam Motor Power .25 kW
Total Power 1.2 kW
Sharpener Weight 270 kg (595 lb)
TABLE 1-5
Oil Type Manufac-
turer
Freezing Point Flash
Point
Autoignition Point Viscosity
ACP-1E
1
1
Waste oil must be disposed of in compliance with applicable national and local regulations.
Orlen
2
2
You may use oil of different manufacturer, but it must meet specification shown above.
-20 C
(-4 F)
Above
140 C
(284 F)
250 C
(482 F)
18-20 cST (1,8-2*10
-5
m
2
/s)
at 40
o
C
(5.905 ft/s at 104 F)
TABLE 1-6






