Wood-mizer EG250E20-EMR - Anti-Kickback Fingers (EG250)

REPLACEMENT PARTS
Anti-Kickback Fingers (EG250)
10
10-9 EGdoc022715 REPLACEMENT PARTS
10.6 Anti-Kickback Fingers (EG250)
REF. DESCRIPTION ( Indicates Parts Available In Assemblies Only ) PART # QTY.
ANTIKICKBACK ASSEMBLY 513520 1
1 SHAFT, ANTI-KICKBACK FINGER ZINC-PLATED 503159-1 1
2 BEARING, UCFL 204 (CX). 500060 2
3 HANDLE, ANTI-KICKBACK FINGER LIFT 503161-1 1
4 PLATE, ANTI-KICKBACK LINK 503162-1 1
5 ROD, ANTI-KICKBACK FINGER SUPPORT ZINC-PL. 503160-1 1
6 RING, 25 ZINC-PL. STOPPING LIGHT TYPE F81039-4 2
7 FINGER, ANTI-KICKBACK 503154-1 29
8 SCREW, M8x8 45H GEOMET HEX SOCKET SET W/FLAT POINT ZINC F81014-1 2
9 WASHER, ISO 7093-1-8-200 HV-A2E. F81054-11 2
10 WASHER, 10.5 SPECIAL FLAT ZINC F81055-6 2
11 WASHER, Z 10.2 SPLIT LOCK ZINC F81055-2 2
12 BOLT, M10X16-8.8 HEX HEAD FULL THREAD ZINC F81003-13 2
13 WASHER, 8.2 SPLIT LOCK ZINC F81054-4 2
14 BOLT, M8X16-8.8-B HEX HEAD FULL THREAD ZINC F81002-20 2
15 WASHER, 792 M12/13 (Bossard) RIBBED LOCK F81056-15 4
16 BOLT, M12X25-8.8 HEX HEAD FULL THREAD ZINC F81004-31 4
17 CAP, RRWA 91626 HANDLE END 086875 1
18 BUSHING, 25.5/38.5-10 513521-1 28