1
Read through entire manual before installing, operating, or servicing this unit.
Failure to follow any steps or guidelines could result in personal injury, death, destruction
of property or may cause the unit to become inoperable. These are the “original Instructions for this unit.”This
manual must be kept with the unit at all times.
Safety Guidelines
Precautions
Do not operate if the unit or any of its parts:
• Have been exposed to fire.
• Have been submerged in or exposed to excessive
water.
• Has significant interior or exterior damage.
If any of the above are suspected make sure to have
your unit serviced by a qualified professional before
continuing operation.
*The unit is rated for an ambient temp of 10-40° C, 80 RH % at a
maximum 200 meters.
Electrical Grounding
The unit must be grounded.
Failure to ground the unit will result in unreliable
performance or an inoperative unit. You can ground
the unit by connecting the unit to a grounded
metal, permanent wiring system. Make sure the
unit is in accordance with national and local electrical
codes. If you don’t know the building codes in your
area or need more information, please contact your
municipal office.
*Normally airborne noise is rated at 77 dB.
Refrigerant!
• Unit contains R-134a refrigerant under high
pressure. Refrigerant must be recovered to relieve
pressure before servicing.
• DO NOT use unapproved refrigerants, substitutes
or additives.
• Failure to abide by these guidelines can result in
death, injury and property damages.
• Contact Nyle’s service department for more
information on refrigerant options.
Electrical Shock!
• Turn off power to unit
before service.
• Make sure wires are labeled
before disconnecting.
• Test unit after reconnecting
wires.
• Failure to do the above could result in death or injury.
High Temperatures!
• Kiln chamber can reach
internal temperatures of
over 90°F. working in these
temperatures can cause heat stroke and minor burns.
• Pregnant women, children, the elderly and those
with signicant health issues are at higher risk of heat
stroke and must be supervised in high temperatures.
• Kiln operators should check for temperature and
take proper safety precautions before entering the
kiln chamber.
• DO NOT purge or
pressurize this system with
oxygen to test for leakage.
Using oxygen may cause
explosive reaction.
Explosion Hazard!
Supervision!
- The appliance is not to be used by person (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction.
- Supervised children are not to play with the appliance.
To Next Page
Loading...