Wood-mizer Laser Sight - Laser Operation; Laser Operation - LT40

LASER OPERATION
Laser Operation - LT40
4
4-1 97LS97doc062612 LASER OPERATION
SECTION 4 LASER OPERATION
When properly installed, the laser option will guide you in making cuts.
To turn on the laser, raise the laser toggle switch to the ON
l
(1) position.
To turn off the laser, lower the laser toggle switch to the OFF° ( 0 )position.
4.1 Laser Operation - LT40
See Figure 4-1. LT40 AC Panel
FIG. 4-1