Wood-mizer LT10 - Tools Necessary for Assembling the Sawmill

SAWMILL ASSEMBLY
Tools Necessary for Assembling the Sawmill
SAWMILL ASSEMBLY 15doc082114 2-4
2
2.1.3 Tools Necessary for Assembling the Sawmill
F81037-1 M20 Nut 28 -
F81032-1 M8 Nut 1 -
F81002-20 M8x16 Bolt 6 -
F81002-23 M8x100 Bolt 12 -
F81059-2 Washer, 21 Flat Zinc 28 -
F81053-1 Washer, 6.4 Flat Zinc 2 2
095919 Cap, A 50x30 Black 2 -
097480 Pipe Cap 40x40x(3-4) 6 -
F81056-1 13 Flat Washer 2 28
F81034-1 M12 Hex Nut 2 2
F81034-2 M12 Hex Nylon Lock Nut - 14
F81004-38 M12x120 Bolt - 12
F81004-12 M12x55 Bolt - 2
F81054-4 Washer, 8.2 Split Lock - 14
F81082-1 Clamp - Plastic Hose 2 -
Table 3:
Required tools
Flat Wrench #8 1pcs
Flat Wrench #10 2pcs
Flat Wrench #13 2pcs
Flat Wrench #17 2pcs
Flat Wrench #19 2pcs
Ratchet Wrench #30 1pcs
Hammer 1pcs
Allen Wrench #4 1pcs
Allen Wrench #5 1pcs
Table 2: