Wood-mizer LT15 - Loading a Log

Trailer Operation
Loading A Log
Trailer Operation 1510doc111714 2-7
2
2.3 Loading A Log
DANGER! Keep all persons out of the path of moving
equipment and logs when operating sawmill or loading and
turning logs. Failure to do so will result in serious injury.
1. Position the log at the ends of the loading ramps, centering the length of the log with the
winch.
2. Raise the side supports to vertical to prevent the log from falling off the side of the saw-
mill.
3. Route the winch cable around the top of the log and back to the winch bracket. Attach the
cable hook to the winch bracket.
See Figure 2-4.
FIG. 2-4
150197-2
Route winch cable
around log and attach
cable hook to bracket
Raise side supports
to vertical