Wood-mizer LT15 - Customer and Sawmill Identification

Introduction
Customer and Sawmill Identification
1
1-8 15doc092319 Introduction
1.4 Customer and Sawmill Identification
Each Wood-Mizer LT15 sawmill is identified with a model number, revision, and serial number
(see the figure below).
Model: LT15S Rev. A1.00+
Dimensions: Metric
Length: 161" 4.09m
Width: 6'-3" 1.89m
Height (Ground To Mast): 5'-4" 1.98m
Height (Max Head Position): 6'-6" 2.0m
Bed Height (Ground To Bed): 11" 0.27m
Blade Length: 158" 4.01m
Weights: G14
Basic Unit(with heaviest power option):
915 lbs
Cutting Capacity:
Length:
Diameter: 28" 0.71m
Maximum Log Weight: 4000 lbs. 1814kg
Max Clamp Width (from stop block):
23"
0.58m
Max Throat Width (guide to guide):
26"
0.66m
Max Cant Width (outer guide to stop block): 23" 0.58m
Min. Cut Height: 1" 25.4mm
Max. Cut Height:
27"
0.68m
Maximum Throat Depth:
10 1/2"
0.26m
Power Unit:
G14
Manufacturer: Kohler
Fuel: gas
Horsepower Rating*: 14
Weight (lbs)*: 90
Cooling System*: air
Fuel Capacity*: 7L/7.4qts
Engine Oil & Type*:
API SJ 10W30
Engine Oil Capacity w/Filter*: 1.32L/1.4qts
Coolant Type*: N/A
Coolant Capacity*: N/A
Rates:
Hourly Production (Average range w/experienced
operators/average size logs):
320 bd ft/hr
*Manufacturer's Specification
MFG BY/FABRIQUÉ PAR: WOOD-MIZER PRODUCTS, INC. 8180 W. 10th St. Indianapolis,
46214-2400 U.S.A. 317/271-1542 Or 800/553-0182
Model No.:
Serial No.: Rev.:
LT15 G13
09970001
A1.00