Wood-mizer LT15 - Fuel Tank Installation

Sawmill Assembly
Fuel Tank Installation
Sawmill Assembly 15doc092319 3-12
3
See Figure 3-15.
3.9 Fuel Tank Installation
1. Install the provided fuel tank assembly to the saw head mast using the provided fasteners.
See Figure 3-16.
2. Connect the existing fuel lines from the engine to the fuel tank fittings and secure properly.
FIG. 3-15
FIG. 3-16
150209-2
Disassemble sawdust
deflector and push handle
from shipping positions
and reinstall for operation.
150210-34
Fuel Tank
Assembly
3/8” SAE Flat
Washer (2)
3/8-16 x 3” Hex
Head Bolt (2)
3/8-16 Hex
Nylon Lock
Nut (2)