Model: LT15 Rev. E6.09+
Dimensions: Metric
Length: 20'-4" 6.19m
Width: 6'-3" 1.89m
Height (Ground To Mast): 5'-4" 1.98m
Height (Max Head Position): 8'-6" 2.59m
Bed Height (Ground To Bed): 11" 0.27m
Height (Ground To Mast - LT15GO Only):
7'-1/2" 2.14m
Height (Max Head Position - LT15GO Only):
9'-9 1/2" 2.98m
Bed Height (Ground To Bed - LT15GO Only):
27" 0.68m
Blade Length: 158 4.01m
Weights: G18
Basic Unit(with heaviest power option): 1459 lbs 661kg
Cutting Capacity:
Length: 17'-8" 5.38m
Diameter: 28" 0.71m
Maximum Log Weight: 4000 lbs. 1814kg
Max Clamp Width (from stop block): 23" 0.58m
Max Throat Width (guide to guide): 26" 0.66m
Max Cant Width (outer guide to stop block): 23" 0.58m
Min. Cut Height: 1" 25.4mm
Max. Cut Height: 27" 0.68m
Maximum Throat Depth: 10 1/2" 0.26m
Power Unit:
G18 G25
D10
D17
E10
Manufacturer: Kohler Kohler Yanmar Kohler
Lincoln
Fuel: gas gas
Diesel
Diesel
Electric
Horsepower Rating*: 19 23.5 9.1 15.4
10
Weight (lbs)*: 90 94 145.4
Cooling System*: air air air water
air
Noise Level (dba)*: 95-101.3(@3000 rpm) 96-103(@3000 rpm)
97 (Noise Output @ Continuous
Rating, Mean of Four Directions
at 1 Meter)
78 (At 7m in an open field at
3600rpm*)
Fuel Consumption(gallon/hour)*: 1.2-1.6 1.5-2
.6(@Full load)
.54 (Full Load, @1800 rpm)
.43 (75% Load, @1800 rpm)
.32 (50% Load, @1800 rpm)
.19 (25% Load, @1800 rpm)
1.10 (Full Load, @3600 rpm)
.87 (75% Load, @3600 rpm)
.66 (50% Load, @3600 rpm)
.39 (25% Load, @3600 rpm)
Engine Oil & Type*:
API SJ 10W30 API CD or Higher 15W40 API SJ/CF 5W40
Engine Oil Capacity w/Filter*:
1.6-1.7 L/1.7-1.9 qts 1.6 L/1.7 qts 2.5 L/2.64 qts
Coolant Type*:
N/A
N/A AGIP Antifreeze Spezial
Coolant Capacity*:
N/A
N/A Contact Kohler For Proper Amount
Rates:
Hourly Production (Average range w/experienced
operators/average size logs):
320 bd ft/hr
*Manufacturer's Specification
To Next Page
Loading...
