Safety & General Information
Sawmill Operation
1
1-3 25doc052711 Safety & General Information
carriage. Failure to do so will result in serious injury.
DANGER! Keep all persons out of the path of moving equipment and
logs when operating sawmill or loading and turning logs. Failure to do
so will result in serious injury.
DANGER! Maintain a clean and clear path for all necessary movement
around the mill and lumber stacking areas. Failure to do so will result in
serious injury.
DANGER! Always be sure the blade is disengaged and all persons are
out of the path of the blade before starting the engine or motor. Failure
to do so will result in serious injury.
DANGER! Keep all persons out of the path of returning boards. Failure
to do so will result in serious injury.
WARNING! Always disengage the clutch/brake mechanism whenever
the sawmill is not cutting. Failure to do so may result in serious injury.
WARNING! Always wear eye, ear, respiration, and foot protection
when operating the sawmill. Failure to do so may result in serious
injury.
WARNING! Secure all loose clothing and jewelry before operating the
sawmill. Failure to do so may result in serious injury or death.
WARNING! Always make sure log is clamped securely before sawing.
Failure to do so may result in serious injury or death.
WARNING! Use ONLY water with the water lube accessory. Never use
flammable fuels or liquids. If these types of liquids are necessary to
clean the blade, remove it and clean with a rag. Failure to do so may
result in serious injury or death.
CAUTION! Be sure the pivot rails, turning arm, clamp, and toe boards
are below bed level before loading a log onto the bed. Failure to do so
may result in machine damage or cause misalignment.
CAUTION! Before loading a log, be sure the cutting head is moved far
enough forward so the log does not hit it. Failure to do so may result in
machine damage.
CAUTION! Do not try to force the saw head beyond its upper and
lower travel limits. Damage to the up/down system may result.
CAUTION! Do not use the blade guide arm knob to move the carriage
head forward and backward. Damage to the blade guide arm may
result.
CAUTION! Be sure to stop the blade when returning the carriage.
To Next Page
Loading...
