Safety & General Information
Chains
Safety & General Information 25doc052711 1-14
1
See Figure 1-2. The LT20 L type frame sawmill’s operator position is shown below.
1.11 Chains
See Table 1-10. The load capacity of the chains is listed below.
1.12 Sawdust Extractor Specifications
CAUTION! Always turn on the dust extractor before starting the machine.
See Table 1-11. The dust extractor specifications are given below.
FIG. 1-2
Load Capacity According to ISO No 08A-1
Up/Down Chain 2270KG
TABLE 1-10
Maximum Capacity
1200 m
3
/h
Collector Inlet Diameters (in
front of fan)
150 mm
Motor Power 1.5 kW
Number of Sacks for Waste 1 pcs
Total Capacity of Sacks
0.25 m
3
Weight 110 kg
Conveying Speed When 10 m
Long Hose Is Used
20 m/s
TABLE 1-11
To Next Page
Loading...
