5-37 3097doc041910 Maintenance
MAINTENANCE LOG
(Check Engine And Option Manuals For Additional Maintenance Procedures)
PROCEDURE
MANUAL
REFERENCE
TOTAL HOURS OF OPERATION
FILL IN THE DATE AND THE MACHINE HOURS AS YOU PERFORM EACH PROCEDURE.
A SHADED BOX INDICATES MAINTENANCE IS NOT NEEDED AT THIS TIME.
1550 HRS 1600 HRS 1650 HRS 1700 HRS 1750 HRS 1800 HRS 1850 HRS 1900 HRS 1950 HRS 2000 HRS
Clean & lube mast rails See Section 5.5
Lubricate drum switches See Section 5.6
Grease pivot points and bearings/Oil chains See Section 5.7
Lubricate blade tensioner handle and rods See Section 5.8
Rotate drive/idle blade wheel belts/Check for wear See Section 5.9
Check condition and adjustment of ceramic blade
guide disks (Ceramic Only)
See Section 5.2
Check brake strap tension See Section 5.10
Check belt tensions See Section 5.11
See Section 5.14
See Section 5.15
Check blade throat screw See Section 5.2
Replace cylinder drive bearing fluid See Section 5.13
Check feed & up/down chain tensions See Section 5.14
See Section 5.15
Check up/down gear box fluid level See Section 5.14
Grease up/down shaft bearing See Section 5.14
To Next Page
Loading...
