Wood-mizer LT30 - Customer and Sawmill Identification

Introduction
Customer and Sawmill Identification
1
1-2 3097doc041910 Introduction
1.2 Customer and Sawmill Identification
Each Wood-Mizer sawmill has a model number and a 17-digit Vehicle Identification Num-
ber (VIN). In addition, when you pick up your mill, you will receive a customer number.
These three numbers will help expedite our service to you. Please locate them now and
write them below so you have quick, easy access to them. See the following figures for
model number and V.I.N. descriptions and locations.
(To be filled in by purchaser)
Mill Model ___________________
Mill VIN ___________________
Customer No. ___________________
See below for a description of the V.I.N.
LT30 G25
Basic Sawmill I.D. Engine/Motor
Configuration
MODEL NUMBER DESCRIPTION
Company Identification Number
456=Wood-Mizer Indiana
Weight Class; A=Under 3,000 lbs B=3,001-4,000 lbs
C=4,001-5,000 lbs D=5,001-6,000 lbs
Product No.; 2=LT20/25/27, 3=LT30/40, 4=LT30HD/40HD,
5=LT30/40 Super, 6=LT30HD/40HD Super, 7=LT60/70/80
Length of the Trailer;
20=20 Ft., 24=24’, 35=35’
Number of axles on the trailer
Check Digit
Add all the numbers and divide by 11
Year of Manufacture;
X=1999, Y=2000, 1=2001, 2=2002, 3=2003, etc...
State of Manufacture
N=Indiana, P=Poland
Month of Manufacture
A=January, B=February, C=March, etc...
Revision Level
Sequence Number
Ranging from 000-999
End of 17-Digit VIN
Revision Level (Repeated)
Two-Digit Minor Revision Level
456 A 5 24 1 X S N A F9 017 F9 .01
V.I.N. DESCRIPTION.