Wood-mizer LT35 - Specifications

Introduction
Specifications
Introduction WMdoc072619 1-4
1
1.3 Specifications
1.4 Customer and Sawmill Identification
Each Wood-Mizer sawmill has a model number and a 17-digit Vehicle Identification Num-
ber (VIN). In addition, when you pick up your mill, you will receive a customer number.
Model: LT35 Rev. A1.00+
Dimensions: Metric
Length: 26'-4" 8.02m
Width: 6'-6" 1.97m
Height (Ground To Mast): 6'-11 1/2" 2.11m
Height (Max Head Position): 8'-11" 2.7m
Bed Height (Ground To Bed): 31 1/4" 0.79m
Blade Length: 158" 4.01m
Weights:
Basic Unit with Trailer(with heaviest power option):
Tongue Weight:
Trailer:
Axle Capacity: 3500 lbs 1587kg
Tire Capacity: 1870 lbs 848.2kg
Tire Size: ST215/75R14
Cutting Capacity:
Length: 21' 6.4m
Diameter: 32" 0.81m
Maximum Log Weight:
4400 lbs
1995kg
Max Clamp Width (from stop block): 34" 0.86m
Max Throat Width (guide to guide): 26" 0.66m
Max Cant Width (outer guide to stop block): 22 1/2" 0.57m
Min. Cut Height: 1" 25.4mm
Max. Cut Height: 32 1/2" 0.82m
Maximum Throat Depth: 10 1/2" 0.26m
Power Unit:
G25 D17 D24
Manufacturer: Kohler Kohler Yanmar
Fuel: gas Diesel Diesel
Horsepower Rating*: 23.5 15.4 23.87
Weight (lbs)*: 94 145.4 200
Cooling System*: air water water
Noise Level (dba)*: 96-103(@3000 rpm)
78 (At 23ft (7m) in an open
field at 3600rpm*)
92 (At 25ft in an open
field at 3600rpm*)
Fuel Consumption(gallon/hour)*: 1.5-2
.54 (Full Load, @1800 rpm)
.43 (75% Load, @1800 rpm)
.32 (50% Load, @1800 rpm)
.19 (25% Load, @1800 rpm)
1.10 (Full Load, @3600 rpm)
.87 (75% Load, @3600 rpm)
.66 (50% Load, @3600 rpm)
.39 (25% Load, @3600 rpm)
1.5 (Full Load,
@3600 rpm)
Engine Oil & Type*:
Engine Oil Capacity w/Filter*:
Temperature Range & Oil Grades*:
Coolant Capacity*:
Rates:
Max. Forward (Not Cutting): 180 ft/min
Reverse: 200 ft/min
Hourly Production (Average range w/experienced
operators/average size logs):
375 bd ft/hr
*Manufacturer's Specification