Wood-mizer LT40 DH Series - Belt Sizes; Blade Sizes

Safety & General Information
Belt Sizes
1
1-11 HDSdoc091108 Safety & General Information
1.5 Belt Sizes
See Table 1-2. Belt sizes for the LT40 Series DH are shown.
1.6 Blade Sizes
See Table 1-3. Wood-Mizer TRU•SHARP™ offers three types of blades to provide efficient saw-
ing for all models of sawmills. The engine/motor size of your sawmill and the type of wood you saw
should determine which blade you choose for optimum performance.
See The Blade Handbook for blade hook angle, tooth height, and tooth set specifications.
Description Belt Size Wood-Mizer
Part #
Motor Drive Belt (E25 50Hz) 3BX74 014249
Engine Drive Belt (D42) 3BX72 014085
Alternator Belt (D42) 6PK1080 088181
Blade Pulley Belts
B57
1
1
To insure proper blade tracking, use Goodyear, Dayco Super II, or
Browning belts only.
P04185
Power Feed Drive Belt AX35 015175
Up/Down Drive Belt AX23 015257
Board Return Belt 3L190 015477
TABLE 1-2
Softwood Medium
Hardwood
Frozen Timber or
Dense Hardwood
5-15HP Gas B275IH1030
B275IH741030
B375IH929
B375IH929
1
1
TRU•SHARP™ “F” blades use a 9/29 profile (9° hook angle and 29° back angle) and are designed
to cut frozen and/or extremely dense, hard-to-cut wood. Standard TRU•SHARP™ blades use a 10/30
profile.
7.4-11kW (10-15HP) Electric
16-25HP Gas
33HP Diesel
B376IH1030
B376IH741030
B275IH1030
B275IH741030
B376IH1030
B376IH741030
2
2
Customer may choose preferred blade.
B375IH929
1
15-18.5kW (20-25HP) Electric
42HP Diesel
B376IH1030
B376IH741030
B275IH1030
B275IH741030
B376IH1030
B376IH741030
2
B375IH929
1
TABLE 1-3