Wood-mizer LT40 DH Series - Engine;Motor Specifications

Safety & General Information
Engine/Motor Specifications
1
1-13 HDSdoc091108 Safety & General Information
1.8 Engine/Motor Specifications
See Table 1-6. The power options available for the LT40 Series DH sawmills are listed below.
See Table 1-7. The power options available of the Power Feed and Up/Down Systems for the
LT40 Series DH sawmills are listed below.
Engine/Motor Type
1
1
Use diesel fuel for D42.
Manufacturer Model No. Power Other Specifications
28HP Gasoline Kohler CH745 28KM
3600 RPM, 725 cm
3
42HP Diesel Kubota V1505-T-EBB-EC-L
T-STD.1
42KM
4 cylinders, 1498 cm
3
25HP Electric)
2
2
The electric motors supplied on Wood-Mizer sawmills carry a rating assigned by the motor manufacturer
for the continuous duty operation of the motor, potentially, 24 hours per day, day after day. This rating is
useful in sizing motors for use in applications like blowers for heating and ventilation that are never cycled
off except for system maintenance.
Indukta SA,
Poland
Sg 160L-2 18,5kW 33,8 A, 2930 RPM
TABLE 1-6
Engine/Motor Type Manufacturer Voltage Power WM Part #
Power Feed Motor Leeson, USA 12V 1800 RPM-600W 024169
Up/Down Motor Leeson, USA 12V 1800 RPM-600W 015174
Blade Guide Arm Motor Motor Products
Owosso, USA
12V 60 RPM-17W P09698-1
Hydraulic Pump Motor Motor Products
Owosso, USA
12V 2400 RPM-1320W P09955
TABLE 1-7