Wood-mizer LT40 DH Series - Noise Level; Dust Extractor Specifications

Safety & General Information
Noise Level
Safety & General Information HDSdoc091108 1-14
1
1.9 Noise Level
See Table 1-8. The noise levels of the Wood-Mizer LT40
12
sawmills are listed below.
1.10 Dust Extractor Specifications
See Table 1-1. Specifications of the dust extractors.
Sawmill Noise Level L
EX8
LT40 sawmill equipped with Diesel engine 85.2 dB (A)
TABLE 1-8
1. The noise level measurement was taken in accordance with PN-EN ISO 3746
Standard. The noise exposure level given above concerns an 8-hour work day
2.The measured values refer to emission levels, not necessarily to noise levels in the
workplace. Although there is a relation between emission levels and exposure levels, it is
not possible to determine with certainty if preventives are needed or are not needed. The
factors affecting a current level of noise exposure during work are inter alia room
characteristics and characteristics of other noise sources, e.g. number of machines and
machining operations nearby. Also, the permissible exposure level value may vary
depending on country. This information enables the machine’s user to better identify
hazards and a risk.
Airflow
1200 m
3
/h
Inlet diameter 150 mm
Motor power 1,5 kW
Number of sacks 1 szt.
Capacity of sacks 0.25 mp
Weight 110 kg
Recommended conveying air
velocity in the duct
20 m/s
TABLE 1-1