Sawmill Alignment
Saw Head Tilt
5
5-27 HDSdoc041118 Sawmill Alignment
5.17 Saw Head Tilt
As the blade enters a wide log or cant, the outside of the saw head will drop down slightly.
To compensate for the drop, use the lower track roller horizontal bolts to raise the outside
of the saw head 1/16" (1.5 mm).
1. Move the saw head so the blade is positioned 14 3/4" (375 mm) above a bed rail.
2. Adjust the lower track roller horizontal nuts until the blade measures 14 13/16"
(376.5 mm) from the bed rail near the outer blade guide.
See Figure 5-23.
FIG. 5-23
To Next Page
Loading...
