Wood-mizer LT40L DH - Engine and Motor Specifications; Sawmill Engine and Motor Options; Auxiliary System Motor Specifications; Sawmill Noise Levels

Safety & General Information
Engine/Motor Specifications
Safety & General Information doc041118 1-16
1
1.9 Engine/Motor Specifications
See Table 1-6. The power options available for the LT40S/M/L DH sawmills are listed below.
See Table 1-7. The power options available of the Power Feed and Up/Down Systems for the
LT40S/M DH
sawmills are listed below.
See Table 1-8. The noise levels of the Wood-Mizer sawmills are listed below.
Engine/Motor Type
1
1
Use diesel fuel for D40.
Manufacturer Model No. Power Other Specifications
42HP Diesel Kubota, Japan V1505-TE 42KM
4 cylinders, 1498 cm
3
25HP Electric (Super only)
2
2
The electric motors supplied on Wood-Mizer sawmills carry a rating assigned by the motor manufacturer
for the continuous duty operation of the motor, potentially, 24 hours per day, day after day. This rating is
useful in sizing motors for use in applications like blowers for heating and ventilation that are never cycled
off except for system maintenance.
Indukta SA,
Poland
Sg 160L-2 18,5kW 33,8 A, 2930 RPM
TABLE 1-6
Engine/Motor Type Manufacturer Voltage Power WM Part #
Power Feed Motor
(only Super sawmills)
Leeson, USA 12V 1800 RPM-600W 024169
Up/Down Motor
(only Super sawmills)
Leeson, USA 12V 1800 RPM-600W 015174
Blade Guide Arm Motor Motor Products
Owosso, USA
12V 60 RPM-17W P09698-1
Hydraulic Pump Motor Motor Products
Owosso, USA
12V 2400 RPM-1320W P09955
TABLE 1-7
Idle Engaged
Sawmill Equipped With Gas Engine 95 dB (A) 98 dB (A)
Sawmill Equipped With Electric Motor 79 dB (A) 93 dB (A)
TABLE 1-8