Wood-mizer LT40L DH - Drive Bearing Maintenance; Drive-Side Cylinder Bearing Housing Refill

Maintenance
Drive Bearing
Maintenance HDSdoc041118 3-14
3
3.15 Drive Bearing
Refill the fluid in the drive-side cylinder bearing housing every 500 hours of operation.
Remove the top and bottom oil plugs. Pour an Automatic Transmission Fluid (ATF, SAE
30) into the top hole until it begins to flow from the bottom hole. Reinstall the square oil
plug to the bottom hole and the vented oil plug to the top hole.
See Figure 3-11.
FIG. 3-11
500