Wood-mizer LT40L DH - Maintenance Log (550-1000 Hours); 550 to 1000 Hour Maintenance Schedule

f:\manuals\forms\538 HDSdoc041118
WOOD-MIZER LT40 SERIES A/DH MAINTENANCE LOG
(Check Engine And Option Manuals For Additional Maintenance Procedures)
PROCEDURE MANUAL
REFERENCE
TOTAL HOURS OF OPERATION
FILL IN THE DATE AND THE MACHINE HOURS AS YOU PERFORM EACH PROCEDURE.
A SHADED BOX INDICATES MAINTENANCE IS NOT NEEDED AT THIS TIME.
550 HRS 600 HRS 650 HRS 700 HRS 75O HRS 800 HRS 850 HRS 900 HRS 950 HRS 1000 HRS
Clean & lube mast rails See Section 3.5
Lubricate drum switches See Section 3.6
Grease pivot points and bearings/Oil chains See Section 3.7
See Section 3.16
See Section 3.17
Check belt tensions See Section 3.11
See Section 3.16
See Section 3.17
Check brake strap tension See Section 3.10
Rotate drive/idle blade wheel belts/Check all belts for
wear
See Section 3.9
Check feed & up/down chain tensions See Section 3.16
See Section 3.17
Check up/down gear box fluid level See Section 3.16
Lubricate blade tensioner handle and rods See Section 3.8
Inspect hydraulic lines & fittings See Section 3.14
Check hydraulic fluid level See Section 3.14
Replace hydraulic system filter See Section 3.14
Replace cylinder drive bearing fluid See Section 3.15
Inspect hydraulic pump motor brushes See Section 3.14
Grease up/down shaft bearing See Section 3.16