f:\manuals\forms\538 HDSdoc041118
WOOD-MIZER LT40 SERIES A/DH MAINTENANCE LOG
(Check Engine And Option Manuals For Additional Maintenance Procedures)
PROCEDURE MANUAL
REFERENCE
TOTAL HOURS OF OPERATION
FILL IN THE DATE AND THE MACHINE HOURS AS YOU PERFORM EACH PROCEDURE.
A SHADED BOX INDICATES MAINTENANCE IS NOT NEEDED AT THIS TIME.
1550 HRS 1600 HRS 1650 HRS 1700 HRS 175O HRS 1800 HRS 1850 HRS 1900 HRS 1950 HRS 2000 HRS
Clean & lube mast rails See Section 3.5
Lubricate drum switches See Section 3.6
Grease pivot points and bearings/Oil chains See Section 3.7
See Section 3.16
See Section 3.17
Check belt tensions See Section 3.11
See Section 3.16
See Section 3.17
Check brake strap tension See Section 3.10
Rotate drive/idle blade wheel belts/Check all belts for
wear
See Section 3.9
Check feed & up/down chain tensions See Section 3.16
See Section 3.17
Check up/down gear box fluid level See Section 3.16
Lubricate blade tensioner handle and rods See Section 3.8
Inspect hydraulic lines & fittings See Section 3.14
Check hydraulic fluid level See Section 3.14
Replace hydraulic system filter See Section 3.14
Replace cylinder drive bearing fluid See Section 3.15
Inspect hydraulic pump motor brushes See Section 3.14
Grease up/down shaft bearing See Section 3.16
To Next Page
Loading...
