Safety
Safety Instructions
2
2-9 WM doc 4/15/21 Safety
Be sure the blade housing and pulley
covers are in place and secure. Use the
safety retainer pin and cable to fasten
blade housing covers.
WARNING! Do not operate the sawmill
without the retaining (stop bumper)
bracket properly installed on the bed.
The saw head may tip and fall from the
sawmill. Failure to follow this will result in serious injury or death.
KEEP PERSONS AWAY
DANGER! Keep all persons out of the path of moving equipment and logs
when operating sawmill or loading and turning logs. Failure to follow this
will result in serious injury or death.
WARNING! Always be sure the blade is disengaged and all persons are
out of the path of the blade before starting the engine or motor. Failure to
follow this may result in serious injury or death.
KEEP HANDS AWAY
.DANGER! Always keep hands away from moving bandsaw blade. Failure
to follow this will result in serious injury or death.
DANGER! Stay a safe distance from rotating members and make sure
that loose clothing or long hair does not engage rotating members result-
ing in possible injury. Failure to follow this will result in serious injury or
death.
.WARNING! Always disengage the blade and shut off the sawmill engine
before changing the blade. Failure to follow this may result in serious injury
or death.
WARNING! Do not touch or perform service functions on a hot engine;
allow the engine to cool sufficiently before beginning any service function.
Failure to follow this may result in serious injury or death.
WARNING! Do not spin the blade wheels by hand.
Failure to follow this may result in serious injury or
death.
WARNING! Disengage the clutch/brake mechanism
whenever the sawmill is not cutting. Failure to follow
this may result in serious injury or death.
WARNING! Do not adjust the engine drive belt with the engine running.
Failure to follow this may result in serious injury or death.
To Next Page
Loading...
