Sawmill Assembly
Pre-assemble the legs
3
3-6 WMdoc041521 Sawmill Assembly
4. Open the parts box and spread the parts out in on orderly fashion. See Figure 3-2.
See Figure 3-2.
5. Ensure all the parts are present.
Pre-assemble the legs
1. Place one F81037-1 nut and F81059-2 washer on all 16 bed feet.
2. Spin the nuts uniformly down each foot, approximately 1/2 to 2/3 of the way.
515413-1 Wedge 1
FIG. 3-2
TABLE 1: PARTS BOX CONTENTS
Part # Description Qty Image
To Next Page
Loading...
