Wood-mizer LX25 - Install the Throttle Cable

Setup
Install the throttle cable
3
3-14 WM doc 12/21/22Setup
11. Install the belt on bandwheel and pulleys. See Fig. 3-22.
3.8 Install the throttle cable
1. Replace the existing cable bracket on the engine with the supplied cable bracket. See Fig. 3-23.
2. Loosely attach the throttle cable to the cable bracket. See Fig. 3-23.
3. Insert the throttle fitting in the throttle lever bracket. See Fig. 3-23.
4. Fasten step washer, lock washer, and bolt. See Fig. 3-23.
FIG. 3-22
FIG. 3-23
Belt
Bandwheel
Pulley
Pulley
55007-3
Throttle fitting
Throttle cable,
loosely secured
Throttle lever
Cable bracket