Wood-mizer LX25 - Sawmill adjustments

To Next Page

To Previous Page

Setup

Install the Blade

Setup WM doc 12/21/223-19

4. Place the new blade around the blade wheels and through the blade guides. See FIG. 3-34..

NOTE: When installing a blade, make sure the teeth are pointing t toward the dust

chute. If necessary, invert the blade as shown in the video.

5. Position 1 1/4” wide blades on the wheels so the gullet is 1/8" (3.0 mm) out from the edge of the wheel. See FIG. 3-35..

Go directly to the Section 4, Sawmill adjustments to align it before installing the

water tank. The tank is in the way of adjustments.

FIG. 3-34

FIG. 3-35

55001-38

150060

1/8” (3.0 mm)

± 1/32” (0.75 mm)

1 1/4”

Blade

Other manuals for Wood-mizer LX25