Safety Instructions
Blade Sizes
Safety Instructions doc121019 1-15
1
1.10 Blade Sizes
See Table 1-3. Wood-Mizer offers three types of blades for all models of sawmills to provide efficient
sawing. The engine/motor size of your sawmill and type of wood you saw should determine which
blade you choose for optimum performance.
See the Blade Handbook for blade hook angle, tooth height and tooth set specifications.
1.11 Cutting Capacity
See Table 1-4. The log size capacities of the LX50 sawmill are listed below.
1.12 Engine/Motor Specifications
See Table 1-5. The power options available for the LX50 sawmills are listed below.
See Table 1-6. Specifications of power supply for the LX50E7 sawmill are given in the table below.
Engine/Motor Size Recommended Blade for Sawing:
Thickness Length
EH7S/G14
0.035" (0.90mm)
0.039" (1 mm)
0.042" (1.07 mm)
0.045" (1.14mm)
3340-3360 mm
(131,5"-132")
TABLE 1-3
Maximum
Diameter
Maximum
Length
LX50 66 cm 3.8 m
TABLE 1-4
Engine/Motor Type Manufacturer Model Number Other Data
Electric Motor, EH7S 5.5 kW Indukta, Poland Sg132S-2A-HM 3 x 400V, 50 Hz
Electric Motor, EH7 5.5 kW Indukta, Poland Sg132S-2A 3 x 400V, 50 Hz
Electric Motor, EC7 5.5 kW Indukta, Poland Sg132S-2A 3 x 400V, 50 Hz
Electric Motor, EB7S 5.5 kW Indukta, Poland Sg132S-2A-HM 3 x 230V, 50 Hz
Electric Motor, EB7 5.5 kW Indukta, Poland Sg132S-2A 3 x 230V, 50 Hz
TABLE 1-5
3-Phase V Circuit Breaker Recommended
Wire Size
400 VAC 16 A
2.5 mm
2
Maximum length: 15 m
TABLE 1-6
To Next Page
Loading...
