Sawmill Operation
Transporting the Sawmill
Sawmill Operation doc121019 3-33
3
3.28 Transporting the Sawmill
The assembled sawmill can be transported in an appropriately equipped pickup truck.
1. Move the saw head to one of the segments equipped with the stop block and secure it in place with
the locking pin.
2. Divide the bed frame into the segments.
3. Slide the bed frame segments into the truck.
4. Use a forklift to load the saw head with the mast and bed segment into the truck and secure it with
transport straps.
WARNING! Keep all persons out of the path of the saw head while
loading and unloading the sawmill. Failure to do so may result in
serious injury or death.
To Next Page
Loading...
