Wood-mizer LX50 G14S - Check Sawmill before Operation; Keep Persons Away; Keep Hands Away

Safety Instructions
Check Sawmill Before Operation
Safety Instructions doc032021 1-8
1
Check Sawmill Before Operation
DANGER! Make sure all guards and covers are in place and secured
before operating the sawmill. Failure to do so may result in serious
injury.
Keep Persons Away
DANGER! Keep all persons out of the path of moving equipment and
lumber when operating the sawmill. Failure to do so may result in
serious injury.
DANGER! Always be sure all persons are out of the path of the blade
before starting the engine/motor. Failure to do so may result in serious
injury.
WARNING! Allow the blade to come to a complete stop before
opening the blade housing cover. Failure to do so may result in serious
injury.
Keep Hands Away
DANGER! Always shut off the blade engine/motor before changing the
blade. Failure to do so may result in serious injury.
DANGER! Engine components can become very hot during operation.
Avoid contact with any part of a hot engine. Contact with hot engine
components can cause serious burns. Therefore, never touch or
perform service functions on a hot engine. Allow the engine to cool
sufficiently before beginning any service function.
DANGER! Always keep hands away from moving bandsaw blade.
Failure to do so may result in serious injury.
DANGER! Always be aware of and take proper protective measures
against rotating shafts, pulleys, fans, etc. Always stay a safe distance
from rotating members and make sure that loose clothing or long hair
does not engage rotating members resulting in possible injury.