Wood-mizer LX50 G14S - Engine;Motor Specifications

Safety Instructions
Engine/Motor Specifications
1
1-15 doc032021 Safety Instructions
1.12 Engine/Motor Specifications
See Table 1-5. The power options available for the LX50 sawmills are listed below.
See Table 1-6. Specifications of power supply for the LX50E7 sawmill are given in the table below.
DANGER! It is recommended that a 30mA Ground Fault Interrupter
(GFI) be used.
See Table 1-7. See the table below for specifications of the engine used on the LX50G14 sawmills.
Engine/Motor Type Manufacturer Model Number Other Data
Electric Motor, EH7S 5.5 kW Indukta, Poland Sg132S-2A-HM 3 x 400V, 50 Hz
Electric Motor, EH7 5.5 kW Indukta, Poland Sg132S-2A 3 x 400V, 50 Hz
Electric Motor, EC7 5.5 kW Indukta, Poland Sg132S-2A 3 x 400V, 50 Hz
Electric Motor, EB7S 5.5 kW Indukta, Poland Sg132S-2A-HM 3 x 230V, 50 Hz
Electric Motor, EB7 5.5 kW Indukta, Poland Sg132S-2A 3 x 230V, 50 Hz
TABLE 1-5
3-Phase V Circuit Breaker Recommended
Wire Size
400 VAC 16 A
2.5 mm
2
Maximum length: 15 m
TABLE 1-6
Engine Manufacturer Model Number Other Data
G14 Gas Engine Kohler, USA CH440-3149 14 hp
TABLE 1-7