SAWMILL ASSEMBLY
Tools Necessary for Assembling the Sawmill
SAWMILL ASSEMBLY 15doc032021 2-7
2
2.1.3 Tools Necessary for Assembling the Sawmill
2.2 Unpacking the Sawmill
WARNING! Assemble the sawmill bed on firm, level ground. Fasten
the sawmill to the ground to prevent moving during operation. Failure
to do so may cause the saw head to tip, resulting in serious injury or
death.
Needed tools:
- Strap cutter
- Screwdriver set
- Socket wrench set (sizes: 10, 13, 17 and 19)
- Socket wrench extension bar (option)
- Flat wrench set
- Allen wrench set
- Moving equipment (such as a fork-lift truck) and a belt to lift the sawmill with this equipment
Leave enough room around the sawmill for the operators, sawdust removal, log loading, and board
removal.
Foot, Bed 514997
F81037-1
NUT, M20-8- HEX ZINC
24 24 24 24
F81059-2
WASHER, 21
24 24 24 24
Tab l e 3:
Required tools
Flat Wrench #8 1 pc
Flat Wrench #10 2 pcs
Flat Wrench #13 2 pcs
Flat Wrench #17 2 pcs
Flat Wrench #19 2 pcs
Ratchet Wrench #30 1 pc
Hammer 1 pc
Allen Wrench #4 1 pc
Allen Wrench #5 1 pc
Tab l e 2:
To Next Page
Loading...
